
A busy site changes every week. Scaffolds go up, excavations open, plant moves in and new trades arrive on Monday morning. Good signage keeps everyone on the same page through all of it, from the site manager to the delivery driver who is only there for ten minutes.
Key takeaways
- Employers must provide safety signs wherever a significant risk has not been removed or controlled in another way.
- Signs back up your other safety measures. They never replace them.
- Five sign types use set shapes and colours, so the message is understood before anyone reads a word.
- Start at the entrance, then cover the perimeter, routes, hazards, fire points and first aid.
- Put signs up before work starts and move them as the site changes.
- ACM suits long builds, Correx short ones, Foamex indoors and vinyl smooth surfaces.
Why are site safety signs important?
- They protect people. A clear sign warns of a deep excavation or overhead work before someone walks into it. On a site where hazards move daily, that warning has to be instant.
- They are a legal duty. The Health and Safety (Safety Signs and Signals) Regulations 1996 require employers to provide safety signs wherever there is a significant risk that has not been avoided or controlled by other means, and to explain to their workers what the signs mean.
- They keep the public out. On construction sites, the Construction (Design and Management) Regulations 2015 expect the principal contractor to take reasonable steps to stop unauthorised people getting onto the site. Clear signs on the gates and hoarding are part of that.
- They speak to everyone. Sites bring together people who speak many languages. Standard shapes, colours and symbols, set out in BS EN ISO 7010, are understood at a glance.
- They show you take safety seriously. Neat, clean, branded signage tells visitors, clients and inspectors that the site is well run.
Pro tip A sign is the last line of defence, not the first. Fence the excavation, then sign it. The HSE is clear that signs are not a substitute for removing or controlling a risk.
What do the colours and shapes on safety signs mean?
Safety signs work because the shape and colour carry the message before anyone reads the words. There are five types:
| Sign type | Shape and colour | Meaning | Site examples |
|---|---|---|---|
| Prohibition | Red circle with a diagonal bar, black symbol on white | You must not do this | No unauthorised access, no smoking, no entry for pedestrians |
| Mandatory | Blue circle, white symbol | You must do this | Hard hats, hi vis, safety boots, eye and ear protection |
| Warning | Yellow triangle with a black border | Danger or hazard ahead | Construction site, deep excavation, overhead work, plant operating |
| Safe condition | Green square or rectangle, white symbol | The safe way or safe place | First aid, emergency exit, fire assembly point |
| Fire equipment | Red square or rectangle, white symbol | Where to find fire fighting equipment | Fire point, fire extinguisher, fire alarm call point |
Many site entrances combine several of these on one board, like the job below. Each rule sits in its own colour coded panel, so a visitor reads the whole set of site rules in one look.


Real jobs: a site entrance board with the dangerous site warning, hard hat, boots and hi vis rules, the visitor reporting rule and no unauthorised access. Right, ACM safety signs printed direct on our Fuji UV flatbed.
Where should you put site safety signs?
- Every entrance. A site safety board at each gate: the site is dangerous, the PPE everyone must wear, where visitors report and that unauthorised access is not allowed.
- The perimeter and hoarding. Warning and prohibition signs at regular spacing along fences and hoarding, so anyone approaching from any side gets the message.
- Vehicle and pedestrian routes. Speed limits, one way systems, reversing vehicles and separate walkways for people on foot.
- Specific hazards. Excavations, overhead work, scaffolds, electrical equipment, plant operating areas and stored materials. Put the sign where people will see it before they reach the hazard.
- Fire points and the assembly point. Red fire equipment signs where extinguishers and alarms sit, and a green assembly point sign where everyone gathers in an emergency.
- First aid and welfare. Green signs for the first aid point, plus the site office, canteen and toilets so new arrivals find them quickly.
Keep signs at eye level where you can, well lit and clear of clutter. Too many signs crowded together compete with each other, so group related rules on one board instead.
When should you put safety signs up?
- Before work starts. Entrance boards and perimeter signs go up as the site is set up, before the first trade arrives.
- When hazards change. A new excavation, a crane on site or a change to the traffic route needs signage on the day it happens.
- At each phase of the build. Groundworks, frame, fit out and handover all bring different risks. Review your signs at each stage and take down any that no longer apply, so the ones that matter stay believable.
- When signs are damaged or faded. A cracked, dirty or faded sign is easy to ignore. Check signs regularly and replace them when they stop being clear.
What material should site safety signs be printed on?
- ACM for long builds. Aluminium composite is rigid, weather resistant and hard to damage. We print it direct on our Fuji UV flatbed with no laminating or mounting, so colours stay bold and edges stay crisp. See ACM Dibond printing.
- Correx for short term sites. Light, waterproof and quick to fix to fencing with cable ties. Ideal for short jobs and changing routes. See Correx signs.
- Foamex indoors. Smooth and light, perfect for site offices, welfare cabins and inside the building during fit out.
- Vinyl for smooth surfaces. Applied straight onto hoarding panels, doors or cabins.
Not sure which board suits your site? Our guide to Foamex vs Correx vs ACM compares all three.
What should you check before ordering site safety signs?
- Your risk assessment. List the hazards on site and which ones need a sign.
- Each entrance and route. Count gates, walkways and vehicle routes so nothing is missed.
- How long the site will run. This decides ACM, Correx, Foamex or vinyl.
- Fixings. Fencing, hoarding, posts or walls. Tell us so the boards suit the way they will be fixed.
- Branding and contacts. Add your logo, the site manager and emergency numbers to the entrance board.
- Colours. If your artwork is RGB we can convert it to CMYK, but there is a possibility of colour change.
- Timing. Standard jobs take 7 to 10 working days, express 3 days and super express 24 to 48 hours.
Need site safety signs?
Send us your sign list, site plan or an existing board you want to match. We will check the artwork for free, send a digital proof and print your signs in house in Uxbridge.
This guide is general information, not legal advice. For your own site, follow your risk assessment and the HSE guidance on safety signs.


